Support for Dryers
Recommended articles for Dryers
- Tumble dryer does not heat up
- Cleaning tumble dryer filters and condenser
- Tumble dryer displays error message E60 and does not heat up
- Start - Pause LED flashes on tumble dryer
- Tumble dryer’s water tank is empty
- Tumble dryer stops after a few minutes of the cycle
- Tumble dryer drum does not rotate, no error message
- Tumble dryer displays error message EHO, EH0
- Tumble dryer displays a padlock
- Tumble dryer does not start / does not work
Search our help articles
Search suggestions
Quick actions
All Dryers articles
- Cleaning tumble dryer filters and condenser
- Clothes are too creased after drying in tumble dryer
- Condenser tumble dryer does not dry properly and/or does not heat up and/or shows wrong time duration on the display
- Drying cycle is too long
- Excessive moisture in room, on walls and windows where the tumble dryer is located
- How to change the dryer door opening directions?
- How to sanitize my dryer?
- Iron Aid dryer does not start
- Iron Aid tumble dryer displays error message Err
- Iron Aid tumble dryer does not dry well
- Light in the drum of the tumble dryer does not switch off
- Light in the drum of the tumble dryer does not work
- Moisture, condensation, water in tumble dryer
- Part of my tumble dryer is damaged
- Start - Pause LED flashes on tumble dryer
- The display of the dryer shows different running times for the same programme
- The handle for opening the tumble dryer is broken
- The time displayed on the tumble dryer display does not match the time indicated on the energy label
- Tumble dryer blows fuses / trips RCD circuit breaker
- Tumble dryer damages clothes
- Tumble dryer displays a padlock
- Tumble dryer displays error code E70
- Tumble dryer displays error message "Err"
- Tumble dryer displays error message C0 / CO
- Tumble dryer displays error message C6
- Tumble dryer displays error message C8
- Tumble dryer displays error message CD
- Tumble dryer displays error message CE / CF
- Tumble dryer displays error message E20, C2 or emits 2 beeps / 2 flashes
- Tumble dryer displays error message E40
- Tumble dryer displays error message E50
- Tumble dryer displays error message E60 and does not heat up
- Tumble dryer displays error message E80
- Tumble dryer displays error message EHO, EH0
- Tumble dryer does not heat up
- Tumble dryer does not start / does not work
- Tumble dryer does not stop when the cycle is finished
- Tumble dryer does not switch on after a drying cycle
- Tumble dryer does not work / does not react
- Tumble dryer door opens during a cycle
- Tumble dryer drum does not rotate, no error message
- Tumble dryer emits a louder noise during wool cycle
- Tumble dryer emits unpleasant smells
- Tumble dryer emits unusual noises
- Tumble dryer ends the programme immediately after the start
- Tumble Dryer generates scraping/rubbing noise while drum rotating
- Tumble dryer has visible signs of damage
- Tumble dryer is leaking
- Tumble dryer not drying, not drying properly, too long drying
- Tumble dryer shrinks clothes
- Tumble dryer stops after a few minutes of the cycle
- Tumble dryer’s water tank is empty
- Tumble Dryers - Overview
- Tumble dryer's Condenser LED is on
- Tumble dryer's door will not open or is defective / broken
- Tumble dryer's drying cycle does not end
- Tumble dryer's drying results are poor and laundry is damp after drying
- Warning light(s) of tumble dryer cannot be switched off
- When I open my Zanussi tumble dryer, there is a large amount of lint / fluff
- Wool clothes have shrunk after the drying cycle
- Zanussi dryers energy efficiency - heatpump vs condenser?
