Issue
- Oven clock flashes
- Oven clock displays "0:00" or "12:00" and flashes
- How to set the oven clock?
Applies to
- integrated oven
- freestanding cooker
Resolution
Touch control (without + and - on display)
1. Press 
until starts to flash 
2. Use the temperature dial to set the hour
3. Press 
to confirm, now minutes should be flashing 00
4. Use the temperature dial to set the minutes
5. Press to confirm 
Touch control (without + and - on display)
1. Press 
repeatedly until time of day starts to flash 
2. Use 
and 
to adjust the time
3. Leave for approximately 5 seconds and the time will set itself
Button control (Older style)
1. Press 
until time of day it starts to flash 
2. Use 
and 
to set the correct time
3. Leave for approximately 5 seconds and the time set itself
Updated Button display
1. Press 
until the time of day it starts to flash 
2. Use 
and 
to set the correct time
3. Leave for approximately 5 seconds and the time set itself
Free Standing Cookers
1. Press 
until time of day appears 
2. Use 
and 
to adjust the time and use 
to change between hours and minutes
3. Leave for approximately 5 seconds and the time will set itself.
If you found the following information helpful, please give us a thumbs up below. If this information did not resolve your question, all constructive feedback is welcome.
Cause
- Flashing "0:00" on the clock’s display may be caused by an earlier power failure in the socket to which the oven is connected to.
